450 Future Series
Suitable for 5G communications, base stations, repeaters, RRU remote radio units, electronic fences, power supplies for relay equipment, surveillance, IoT and other smart devices.








Product Introduction
The aluminum alloy cast enclosure is made by pouring molten aluminum into a mold, with the aluminum alloy body formed in a single casting. The toughness of cast aluminum provides the enclosure with high-strength impact protection.
Basic Parameters
High-Efficiency Heat Dissipation
Excellent heat dissipation performance: after the inner wall of the enclosure absorbs heat, the large heat sinks on the front and back of the outer wall dissipate it. With good thermal conductivity, aluminum conducts heat more than three times as well as sheet metal.
Corrosion Resistance
The aluminum surface has a dense oxide protective film and is not easily corroded.
Signal Interference Resistance
The ingenious one-piece molded structure provides remarkable electromagnetic shielding and resists EMP (electromagnetic pulse) surges.
High Ingress Protection Rating
With no louvers, it completely prevents the ingress of rain, dust and foreign objects, and the ingress protection rating can reach up to IP68/NEMA6. One-piece die-casting and high-strength IK10 impact resistance.
| Dimensions | |||
| Model | External Dimensions (W*H*D) | Internal Dimensions (W*H*D) | Weight (kg) |
| EC450-17 | 450*368*178mm | 430*295*94mm | 14.4 |
| Standard Parameters | |||
| Brand | Harwell | Color | Silver Gray |
| Series | 321 Future | Surface Treatment | Electrostatic Powder Coating |
| Product Name | Outdoor Cast Aluminum Enclosure | Material | ADC12 Aluminum |
| Ingress Protection (IP) Rating | IP68 | Processing Method | Cast Aluminum |
| Impact Resistance | IK10 | Installation Method | Pole-Mounted / Wall-Mounted |
| Operating Temperature Range | -40±3°C to +85±2°C | Operating Humidity | ≤90%RH |
| Operating Voltage Range | AC100–AC250V | Operating Power | 20-300W |
Schematic Diagram
Optional mounting accessories allow pole-mounted, wall-mounted or floor-standing installation.
The same enclosure can meet the installation requirements of different scenarios at the same time.

